Why Did My Double Glazing Rate “Poor” In My EPC Assessment?

A “Poor” rating for double glazing on an Energy Performance Certificate (EPC) is quite common and usually indicates a lack of documentary evidence rather than a physical fault with your windows. Under current assessment rules (RdSAP 10), if an assessor cannot verify the exact age or performance of your windows, they must use “default conservative assumptions,” which often results in a lower score.

 

Why your double windows were rated “Poor”

Unknown Installation Date: If there is no proof of when the windows were installed, assessors must assume the least efficient option for that type as per government guidelines.

Age of the Units: Double glazing installed before 2002 (2006 for Northern Ireland) often carries higher heat-loss values (U-values) and is frequently rated as “poor” or “average” compared to modern 2021+ standards.

Missing Certification: Without a FENSA certificate, building control approval, or window manufacturer specifications, the software defaults to high heat-loss values even if your windows “look new”!

Frame Material: Metal spacers create “thermal bridges” that lose heat much faster than modern uPVC or timber frames. Newer plastic spacers help reduce energy losses due to thermal bridging. Such plastic spacers in double glazing panes were introduced post 2006.

 

You still think your EPC is incorrect about the windows?

If you believe the rating is incorrect or want to improve it, you can take the following steps:

Provide Evidence to the Assessor: Contact the EPC assessor listed on your EPC. If you can provide a letter from the manufacturer of your windows that proves the u values of the windows, and the date they were fitted, they may be able to update and re-lodge the EPC.

Check for Datestamps: Look at the metal spacer bars between the glass panes or the inside of the frames for printed manufacture dates. If you find one, a photo of it can serve as evidence for a better rating.

If you have partly replaced your old double glazing windows with new glazing, rdSAP will work out an average rating, which may still be poor.